|
Mineral Insulated Probes are known for their excellent mechanical durability and
resistance to electrical break down. Available in outside diameters from 0.020 inch
(0.5mm) to 0.500 inch (12.7mm), Mineral Insulated Thermocouples can be bent to most any
angle without special equipment. Because of its flexibility, the mineral insulated
material can be made to extremely long lengths, coiled for inexpensive shipment, and
straightened upon arrival without damage.
Ungrounded and exposed junctions are electrically isolated from the sheath. Minimum
resistance is 1.5 megohms at 500VDC.
Due to the varying sizes of connection wire and cable, a transition fitting is used
between the cold end of the sheath and the connecting wires. This fitting measures 1 1/4
inch long by 1/4 in outside diameter for 1/8 inch or smaller sheaths, and 1 1/2 inch long
by 3/8 inch outside diameter for 3/16 inch and 1/4 inch sheaths. Larger sheaths are
usually connected to bushings or connector heads, and usually do not require transition
fittings. Sheaths terminating in connectors other than wire or cable do not require
transition fittings.
See the Order Chart for configurations and information.
Order Chart - Mineral Insulated
Probes
Fill in the appropriate numbers or letter to specify the probe of your choice.
Term Descriptions*:
  
* Note: Illustrations are representations of the general appearance of the materials used.
Actual material may differ somewhat from the illustrations.
|
