|
Injection Molding Nozzle Type
In-melt type thermocouple is designed to bolt into the injector nozzle and sense the
temperature of the melt directly, and is rated to 450°C (900°F). The standard 3/8"
hex head stainless steel body has 3/8-24 NFT threads. The sensor tip extends 1/8"
beyond the end of the bolt assembly.
Not In-Melt type thermocouple is designed to screw into a blind hole in the nozzle, and
is rated to 450°C (900°F). The standard 1/4 NFT thread fits most standard nozzles.
Extruder Bolt Type
Designed for direct mounting into extruder barrels, the Bolt Type thermocouples offer
easy interchangeability. Order options allow barrel penetrations of 0 inches (flush) to 1
inch in 1/100th inch increments (Specify as A dimension) and flex extension in 1 inch
Increments (Specify as B dimension).
See Special Order Chart below for more details.
Order Chart - Injection Molding and Extruder Types
|
